ShotTracker Warranty & Return Policy

30-Day Money Back Guarantee

If you are not 100% satisfied, Take Aim Technologies will help you return or exchange your purchase. Contact us within 30 days of receiving your order, then we will email you the steps for a full refund.*

Any items damaged due to reasons not covered under warranty cannot be accepted back for refund under our Money Back Guarantee.

NOTE: This guarantee only applies to orders placed on the webstore at TakeAimTech.com.

* Associated shipping fees are not refundable.

How to Return for Refund:  Request a Return Authorization Form by emailing [email protected] or messaging us via our TakeAimTech.com/contact website form.

Warranty

Take Aim Technologies Development LLC (“Manufacturer”) warrants to the original end user (“Purchaser”) that for 1 year (“Warranty Period”) from purchase, the ShotTracker and accessories (“Product”) will be free from defects in materials and workmanship when properly installed and used for its intended purpose and in its intended operating environment. This warranty is non-transferable and remains solely with the original buyer. It does not transfer if the ShotTracker is sold to another party.

This warranty does NOT apply to any Product that has been either:

(a) Disassembled e.g  mechanical housing, camera or electronics assembly
(b) Altered, repaired or modified
(c) Damaged or destroyed by accidents or similar events or by any intentional, reckless or negligent acts or omissions of any party.

NEVER attempt to repair or modify the ShotTracker yourself. Disassembling a ShotTracker will cause damage that is NOT covered under the warranty. The ShotTracker does not contain any user replaceable parts, except the batteries.

In the event of a defect, return the Product to the Manufacturer, but only after instructed to do so by Manufacturer. Purchaser shall ship and bear the cost of shipping the Product to Manufacturer and Manufacturer shall bear the cost of shipping the Product back to Purchaser after the completion of service under this limited warranty. Purchaser’s exclusive remedy and Manufacturer’s entire liability under this warranty will be for Manufacturer at its option to repair or replace the Product or refund purchase price less any rebates. Manufacturer does not warrant against loss of any data (including data stored on Product returned to Manufacturer for service), and assumes no liability for such loss. Purchaser assumes all liability, and as such releases Manufacturer from any liability, for any accident, injury, damage, death, loss, illegal activity or any other claim that may occur resulting from or during use of the Product, whether or not such use is foreseeable by Manufacturer.

ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.

Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to Purchaser. This warranty gives Purchaser specific legal rights, and Purchaser may also have other rights which vary by jurisdiction.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL MANUFACTURER BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDI-RECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RE-LATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF MANUFACTURER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL MANUFACTURER’S LIABILITY EXCEED THE AMOUNT PAID BY PURCHASER FOR THE PRODUCT.

The foregoing limitations will apply even if any warranty or remedy provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to Purchaser.

TAKE AIM TECHNOLOGIES DEVELOPMENT LLC (Take Aim) DISCLAIMER
All purchasers, users, and any or all parties involved or engaging in the use of ShotTracker products agree to the following:

• Take Aim does not promote or endorse high risk, careless and/or dangerous activities and is not responsible for any injury during use of the ShotTracker.
• The shotgun manufacturer’s operating and safety instructions should be followed at all times. Take Aim is not liable for any use or misuse of firearms.
• ShotTracker’s primary purpose is learning tool for legal activities as defined by local authorities and Take Aim is not liable for any use or misuse.

Purchaser assumes all liability, and as such releases Manufacturer from any liability, for any accident, injury, damage, death, loss, illegal activity or any other claim that may occur resulting from or during use of the Product, whether or not such use is foreseeable by Manufacturer.

Read all of the shotgun manufacturer’s safety information and safety instructions before handling the shotgun, installing the ShotTracker, or using the ShotTracker on a shotgun. Read and apply all of their instructions before using the ShotTracker to avoid injury. WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

Disposal Information: Do not dispose of ShotTracker or batteries in a fire. Dispose of batteries in accordance with local laws and regulations. Correct disposal of this Product: This product should not be disposed of with other house-hold wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use proper return and collection systems or contact us at TakeAimTech.com/contact and we can take this product for environmentally safe recycling.

Repairing or modifying: NEVER attempt to repair or modify the ShotTracker yourself. Disassembling a ShotTracker will cause damage that is NOT covered under the warranty. The ShotTracker does not contain any user replaceable parts. Take Aim Technologies Development, LLC (“Manufacturer”) warrants to the original end user (“Purchaser”) that for the 1 year (“Warranty Period”), the ShotTracker (excluding any third party software) and accessories (“Product”) will be free from defects in materials and workmanship when properly installed and used for its intended purpose and in its intended operating environment.

All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders.

The ShotTracker product is covered by one or more of the following US patent: 10,782,096.  Several patents pending.

ShotTracker is a product of Take Aim Technologies Development LLC in Plano, Texas.
www.TakeAimTech.com ©2022 Take Aim Technologies LP
All rights reserved.

FCC Information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of these measures:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different
  from that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.

Industry Canada: This Class B device meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel broulleur du Canada.